Faster to the finish
SPEEDCUT
The innovative software of our stack cutters thinks for itself: Sophisticated digital functions, intelligent and intuitive control, convenient operation - and significantly accelerated work processes. For precise results, efficient processes and relaxed working.
More efficiency and convenience thanks to smart software solutions.
Our intelligent software solutions make cutting easier than ever: Speedcut lets you create cutting programs quickly and intuitively, while regular updates for THE 56 and THE 68 deliver new functions and improvements and keep your devices up to date. This means you benefit from maximum efficiency, safety and a smooth workflow.
Automatic crop mark recognition
Speedcut automatically recognizes the crop marks in the PDF and immediately creates the appropriate program for the cutting machine (in auto mode).
Additional feature: Impositioning
Do you still have to impose? Speedcut can do this too and gets the best out of your format. You can customize templates.
3D simulation with voice output
Speedcut guides you through the cutting process - visually and with spoken instructions.
Next-level workflow
Clever imposition, better cutting.
See. Hear. Cut.
Data in, editing in progress.
The time machine for your team
We have developed Speedcut so that you can cut even faster and easier – or pass this task on to colleagues with no technical expertise.
In the demo version, saving the editing programme and generating the QR code is deactivated. This is a single workstation licence.
The "purchase package" includes an activation code for the full version, a licence certificate with a serial number and the scanner set. The full version can be purchased from your local dealer. This is a single workstation licence.
Windows
Operating system: Windows 10 1809 (64bit), Windows 11 (64bit)
Processor: Intel- oder AMD-Prozessor 1,5 GHz
RAM: 4GB
Hard drive space: 500MB frei
Graphics card: OpenGL 3.0 oder Direct3D 11.1
Monitor/graphics resolution: 1680x1050
Mac
Operating system: MacOS 11
Processor: Intel oder M1 Apple Silicon-Prozessor
RAM: 4GB
Hard disc space: 500MB frei
Monitor/graphics resolution: 1680x1050
Software requirements for cutting machines
Compatible with THE56 and THE68 cutting machines. From version 3.0.0 of the software, SpeedCut can be used on the machine.
License Agreement Software Speedcut (Status May 2024)
between
Krug & Priester GmbH & Co. KG, Simon-Schweitzer-Strasse 34, 72336 Balingen, Germany
- hereinafter referred to as the „Licensor“ -
and the respective user of the Speedcut software
- hereinafter referred to as the „Licensee“
- individually the „Party“ and together the „Parties“ -
Preamble
The purpose of this License Agreement is to regulate the rights and obligations of the Parties regarding the use by the Licensee of the software for cutting machines offered by the Licensor under the name „Speedcut“ (hereinafter referred to as the „Software“), including demo versions.
Having said this, the parties agree as follows:
§ 1 Grant of license
(1) The Licensor grants the Licensee a non-exclusive, non-transferable, non-sublicensable right to use the
Software to the contractually agreed extent and subject to the rights of termination pursuant to § 6 for an unlimited period of time.
The licensor provides the licensee with the software via download. The licensee can download the software via a link in the service / download area of our websites https://www.ideal.de or https://www.eba.de .
(2) The licensee is not permitted to grant rights of use to third parties.
(3) The software and the accompanying materials are protected by copyright. The Licensor is entitled to all rights to the software and the accompanying materials. Any rights of use thereto shall only be granted to the Licensee to the extent that this is necessary for the contractually intended purposes.
(4) The Licensee acknowledges that not every malfunction in the program sequence constitutes a defect, as it is not possible to develop completely error-free software according to the state of the art.
(5) The licensee must also observe the license terms of third parties for third-party software integrated into the software, which will be pointed out before the software is installed. The license agreement (including third-party provisions) must be actively agreed to before installing the software by ticking the box „I accept the license agreement“ in order to install the software. Future changes will be made available with the respective update of the software.
§ 2 Restrictions on use
(1) The licensee‘s right of use applies to the individual use on a physical workstation computer (hereinafter referred to as „computer“) and may only be exercised by one person at a time.
(2) Activation and use of the software is restricted as follows:
a) The downloaded software does not allow the use of all functions and features.
b) Full use of the software is possible by purchasing an authorization key and the hardware supplied; please contact your dealer for more information.
(3) The software is technically equipped with tamper protection that can detect changes to the program files. If tampering is detected, the license is blocked and the software can no longer be used.
(4) The licensee is prohibited from decompiling, disassembling or reverse engineering the software.
§ 3 Transfer restrictions
The license granted in this License Agreement is intended exclusively for use by the original Licensee and its employees. The Licensee may not rent, sublicense, transfer or lease the Software in whole or in part to third parties, whether for payment or free of charge, without the prior written consent of the Licensor.
§ 4 Liability
(1) The Licensor shall only be liable for damages, for whatever legal reasons,
a) nsofar as the Licensor, its legal representatives or vicarious agents are guilty of intent or gross negligence
b) in the event of culpable injury to life, limb or health
c) in the event of culpable breach of material contractual obligations
d) in the event of defects which the Licensor has fraudulently concealed or the absence of which it has guaranteed
e) insofar as liability exists under the Product Liability Act for personal injury or material damage to privately used objects.
The Licensor shall not be liable for any further claims for damages.
(2) The Licensee is aware that, as part of his obligation to minimize damage, he must regularly back up his data and, in the event of a suspected software error, take all reasonable additional backup measures.
(3) The Licensor shall not be liable for a loss of data if the damage is due to the Licensee‘s failure to carry out regular data backups and thus contribute to the fact that lost data can be restored with reasonable effort.
(4) The Licensor shall not be liable for a failure of the Software that is attributable to an accident, misuse or misapplication by the Licensee.
§ 5 Data protection
The parties shall comply with the applicable data protection regulations.
§ 6 Term, termination
(1) The license agreement begins with the user‘s consent to the license agreement and subsequent download of the software.
(2) The license agreement is generally unlimited in time and can only be terminated for good cause in accordance with this § 6.
(3) The right to terminate the license agreement without notice for good cause remains unaffected. Good cause for extraordinary termination includes, but is not limited to
a) if the other party breaches a material obligation assumed by it in the license terms and does not remedy the breach within the set period despite a warning with a reasonable deadline;
b) if the licensee does not comply with the restrictions on use and transfer pursuant to § 2 and § 3;
c) the legally binding opening of insolvency proceedings against the assets of a party or the refusal to open insolvency proceedings for lack of assets;
d) if the continuation of the contract cannot reasonably be expected of the terminating party, taking into account all circumstances of the individual case and weighing the interests of both parties.
(4) Any termination must be in writing.
(5) Upon termination of the license agreement, it shall automatically expire.
(6) The Licensee is obliged to uninstall the Software from all computers immediately upon termination of the Agreement and to return all copies of the Software and the accompanying materials to the Licensor at its own risk and expense or, if a return is not possible, to irreversibly delete them.
§ 7 Place of performance, place of jurisdiction, applicable law, miscellaneous
(1) The place of performance for all claims arising from the business relationship between the Licensor and the Licensee shall be the Licensor‘s registered office.
(2) The exclusive place of jurisdiction for all claims arising from the business relationship shall be at the place of performance, provided that the Licensee is a merchant, a legal entity under public law or a special fund under public law. However, the Licensor shall also be entitled to take legal action against the Licensee at its general place of jurisdiction.
(3) All disputes arising from contracts to which these terms and conditions apply and all disputes arising from the business relationship between the Licensor and the Licensee shall be governed exclusively by the law of the Federal Republic of Germany. The application of the UN Convention on Contracts for the International Sale of Goods (CISG) and private international law is excluded.
(4) All amendments and additions to the license agreement must be made in writing to be effective. This also applies to the waiver of the written form requirement.
(5) Should one of the provisions of the license agreement be or become invalid, this shall not affect the validity of the remaining provisions. The parties are obliged to replace the invalid provision with the one that best achieves the economically intended result.
(6) This Agreement is drafted in both German and English. In case of discrepancies or contradictions between the German and the English version, the German version shall prevail.